As an Amazon Associate I earn from qualifying purchases.
elago - Improper installation can scratch the AirPods Pro. Perfect dust-proof film magnets in airpods pro case gather a lot of iron & metal dust over time causing permanent black marks inside the case. 3 install the bottom guard following the same method.
Installation 1 attach the guide sticker to the dust guard as shown. Elago dust guard acts as a buffer between your case and the metal dust keeping your case clean always. Experience flawless use of the case with the Dust Guard installed. Upgraded thin slim design the thickness of the plate is 004mm. 4 check that it was aligned properly. 2 hold the guide sticker and attach the dust guard while lining it up with the holes.
Important note it may take you some time and effort to align the dust guard stickers on AirPods Pro, but if you want to keep your airpods Pro clean and beautiful, it will be well worth it. Luxurious-looking keep your airpods pro tidy and looking beautiful all the time! elago Dust guard has various colors and a luxurious plating. Disclaimer airpods pro and Charging Case are not included.
elago - 4 place your fingers in the AirPods inserts to check if the dust guard is applied properly. The thickness of the plate is 004mm. The guard can easily be exchanged out if needed. Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light.
2 place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion. But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market. The guard acts as a buffer between your case and the metallic dust that accumulates over time.
It might be hard and take time to align the stickers on AirPods. If it is not attached properly, it can scratch the AirPods. Did you know? there are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time. Experience flawless use of the case with the Dust Guard installed. 3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut.
elago - The guard can easily be exchanged out if needed. 2 place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion. 4 place your fingers in the AirPods inserts to check if the dust guard is applied properly.
3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light. Did you know? there are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time. But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market.
The guard acts as a buffer between your case and the metallic dust that accumulates over time. It might be hard and take time to align the stickers on AirPods. The thickness of the plate is 004mm. If it is not attached properly, it can scratch the AirPods. Experience flawless use of the case with the Dust Guard installed.
elago - 2 place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion. The thickness of the plate is 004mm. Did you know? there are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time.
It might be hard and take time to align the stickers on AirPods. 4 place your fingers in the AirPods inserts to check if the dust guard is applied properly. If it is not attached properly, it can scratch the AirPods. But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market. The guard acts as a buffer between your case and the metallic dust that accumulates over time.
Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light. 3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. The guard can easily be exchanged out if needed. Experience flawless use of the case with the Dust Guard installed.
elago - 2 place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion. 4 place your fingers in the AirPods inserts to check if the dust guard is applied properly.
But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market. The guard can easily be exchanged out if needed. Experience flawless use of the case with the Dust Guard installed. Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light. The guard acts as a buffer between your case and the metallic dust that accumulates over time.
The thickness of the plate is 004mm. If it is not attached properly, it can scratch the AirPods. Did you know? there are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time. 3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. It might be hard and take time to align the stickers on AirPods.
elago - Without the dust guard, metal will gather inside your case and eventually STAIN THE CASE. If there are an issues, please reach out to our customer service team for help! metal finish adds an amazing look to your charging case! due to how thin the dust Guards are, users will experience no interruption of functions and the case closes WITH NO ISSUES! Perfect gift for any new user! great for birthday presents for loved ones and gifts during the holiday season – ESPECIALLY STOCKING STUFFERS FOR CHRISTMAS and also great for other HOLIDAYS! Elago is a design company first and foremost.
Keep your case clean and looking like the first day you got them! installation can be a little tricky but it is worth it! please follow the installation directions provided in the images. We understand the frustrations that some experience during installation.
Elago has been making Dust Guards since the launch of the 1st generation. Our motto is simple sophistication because we create products that are useful and awesome! we always cREATE products that WE OURSELVES USE, so we know YOU WILL LOVE IT! Elago is bringing back a must have accessory designed for the airpods 3! the dust guard is a thin metallic sticker that prevents the accumulation of metal dust on the magnetic inner parts of the charging case.
elago - But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market. Did you know? there are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time.
3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. 4 place your fingers in the AirPods inserts to check if the dust guard is applied properly. Experience flawless use of the case with the Dust Guard installed. It might be hard and take time to align the stickers on AirPods. The thickness of the plate is 004mm. The guard can easily be exchanged out if needed.
The guard acts as a buffer between your case and the metallic dust that accumulates over time. 2 place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion. If it is not attached properly, it can scratch the AirPods. Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light.
elago - 3 install the bottom guard following the same method. Improper installation can scratch the AirPods Pro. Disclaimer airpods pro and Charging Case are not included. Elago dust guard acts as a buffer between your case and the metal dust keeping your case clean always.
Luxurious-looking keep your airpods pro tidy and looking beautiful all the time! elago Dust guard has various colors and a luxurious plating. 2 hold the guide sticker and attach the dust guard while lining it up with the holes. Perfect dust-proof film magnets in airpods pro case gather a lot of iron & metal dust over time causing permanent black marks inside the case. Installation 1 attach the guide sticker to the dust guard as shown.
Experience flawless use of the case with the Dust Guard installed. Important note it may take you some time and effort to align the dust guard stickers on AirPods Pro, but if you want to keep your airpods Pro clean and beautiful, it will be well worth it. Upgraded thin slim design the thickness of the plate is 004mm. 4 check that it was aligned properly.
elago - 3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. Did you know? there are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time.
If it is not attached properly, it can scratch the AirPods. The thickness of the plate is 004mm. Experience flawless use of the case with the Dust Guard installed. 4 place your fingers in the AirPods inserts to check if the dust guard is applied properly. The guard can easily be exchanged out if needed. The guard acts as a buffer between your case and the metallic dust that accumulates over time. But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market.
Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light. It might be hard and take time to align the stickers on AirPods. 2 place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion.
elago - Did you know? there are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time. Installation 1 attach the bottom sticker by aligning it with the led indicator light.
2 place the top sticker upside down on the bottom sticker so that the adhesive side faces upwards on the body portion. 3 close lid over the upward facing dust guard so that it sticks perfectly to cap once shut. Experience flawless use of the case with the Dust Guard installed. But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market. The guard can easily be exchanged out if needed. It might be hard and take time to align the stickers on AirPods. The thickness of the plate is 004mm. The guard acts as a buffer between your case and the metallic dust that accumulates over time.
1. elago
2 Sets, Upgraded Dustproof Film, Luxurious Looking, Protect from Iron/Metal Shavings US Patent Registered Dark Grey, elago Dust Guard Compatible with Apple AirPods Pro
Installation 1 attach the guide sticker to the dust guard as shown. Elago dust guard acts as a buffer between your case and the metal dust keeping your case clean always. Experience flawless use of the case with the Dust Guard installed. Upgraded thin slim design the thickness of the plate is 004mm. 4 check that it was aligned properly. 2 hold the guide sticker and attach the dust guard while lining it up with the holes.
Important note it may take you some time and effort to align the dust guard stickers on AirPods Pro, but if you want to keep your airpods Pro clean and beautiful, it will be well worth it. Luxurious-looking keep your airpods pro tidy and looking beautiful all the time! elago Dust guard has various colors and a luxurious plating. Disclaimer airpods pro and Charging Case are not included.
| Brand | elago |
| Manufacturer | elago |
| Height | 6.06 cm (2.39 Inches) |
| Length | 4.52 cm (1.78 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 2.17 cm (0.85 Inches) |
| Part Number | EAPP-GUARD-DG-2EA |
| Model | EAPP-GUARD-DG-2EA |
2. elago
Non-Wireless ONLY 18K Gold plating Protection from Iron/Metal Shavings Easy installation 2 Set, elago Dust Guard for AirPods, Rose Gold
2 place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion. But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market. The guard acts as a buffer between your case and the metallic dust that accumulates over time.
It might be hard and take time to align the stickers on AirPods. If it is not attached properly, it can scratch the AirPods. Did you know? there are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time. Experience flawless use of the case with the Dust Guard installed. 3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut.
| Brand | elago |
| Manufacturer | elago |
| Height | 6.5 cm (2.56 Inches) |
| Length | 1.09 cm (0.43 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 3.86 |
| Part Number | EAP-GUARD-RGD-2S |
| Model | EAP-GUARD-RGD-2S |
3. elago
Non-Wireless ONLY 18K Gold plating Protection from Iron/Metal Shavings Must Watch Installation Guide 1 Set, Matte Rose Gold, elago Dust Guard Compatible with Apple AirPods
3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light. Did you know? there are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time. But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market.
The guard acts as a buffer between your case and the metallic dust that accumulates over time. It might be hard and take time to align the stickers on AirPods. The thickness of the plate is 004mm. If it is not attached properly, it can scratch the AirPods. Experience flawless use of the case with the Dust Guard installed.
| Brand | elago |
| Manufacturer | elago |
| Height | 3 cm (1.18 Inches) |
| Length | 10 cm (3.94 Inches) |
| Weight | 0 kg (0 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | EAP-GUARD-MGD-2S |
| Model | EAP-GUARD-MGD-2S |
4. elago
Non-Wireless ONLY 18K Gold plating Protection from Iron/Metal Shavings Easy installation 2 Set, Matte Rose Gold, elago Dust Guard Compatible with Apple AirPods
It might be hard and take time to align the stickers on AirPods. 4 place your fingers in the AirPods inserts to check if the dust guard is applied properly. If it is not attached properly, it can scratch the AirPods. But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market. The guard acts as a buffer between your case and the metallic dust that accumulates over time.
Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light. 3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. The guard can easily be exchanged out if needed. Experience flawless use of the case with the Dust Guard installed.
| Brand | elago |
| Manufacturer | elago |
| Height | 1.02 cm (0.4 Inches) |
| Length | 9.91 cm (3.9 Inches) |
| Weight | 0 kg (0 Pounds) |
| Width | 6.6 cm (2.6 Inches) |
| Part Number | EAP-GUARD-MRG-2S |
| Model | EAP-GUARD-MRG-2S |
5. elago
Rose Gold, elago Dust Guard Compatible with Apple AirPods 2 Wireless Case, 18K Gold plating Protection from Iron/Metal Shavings 2 Sets
But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market. The guard can easily be exchanged out if needed. Experience flawless use of the case with the Dust Guard installed. Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light. The guard acts as a buffer between your case and the metallic dust that accumulates over time.
The thickness of the plate is 004mm. If it is not attached properly, it can scratch the AirPods. Did you know? there are nine magnets in the AirPods Case that can gather a lot of iron/metal dust over time. 3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. It might be hard and take time to align the stickers on AirPods.
| Brand | elago |
| Manufacturer | elago |
| Height | 1 cm (0.39 Inches) |
| Length | 9.9 cm (3.9 Inches) |
| Weight | 0.02 kg (0.05 Pounds) |
| Width | 6.6 cm (2.6 Inches) |
| Part Number | EAP2-GUARD-RG-2S |
| Model | EAP2-GUARD-RG-2S |
6. elago
Elago Dust Guard Compatible with AirPods 3 Case, Dust-Proof Metallic Sticker, Clean Your AirPods 1 Set Gold, Ultra Slim Film, Protection from Iron & Metal Shavings, Luxurious Looking Finish
Keep your case clean and looking like the first day you got them! installation can be a little tricky but it is worth it! please follow the installation directions provided in the images. We understand the frustrations that some experience during installation.
Elago has been making Dust Guards since the launch of the 1st generation. Our motto is simple sophistication because we create products that are useful and awesome! we always cREATE products that WE OURSELVES USE, so we know YOU WILL LOVE IT! Elago is bringing back a must have accessory designed for the airpods 3! the dust guard is a thin metallic sticker that prevents the accumulation of metal dust on the magnetic inner parts of the charging case.
| Brand | elago |
| Manufacturer | elago |
| Part Number | EAP3-GUARD |
| Model | EAP3-GUARD |
7. elago
Elago Dust Guard Compatible with Apple AirPods, Non-Wireless ONLY 18K Gold plating Protection from Iron/Metal Shavings Easy installation 1 Set, Matte Gold
3 close lid over the upward facing dust guard so that it sticks perfectly to the inner ceiling once shut. 4 place your fingers in the AirPods inserts to check if the dust guard is applied properly. Experience flawless use of the case with the Dust Guard installed. It might be hard and take time to align the stickers on AirPods. The thickness of the plate is 004mm. The guard can easily be exchanged out if needed.
The guard acts as a buffer between your case and the metallic dust that accumulates over time. 2 place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion. If it is not attached properly, it can scratch the AirPods. Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light.
| Brand | elago |
| Manufacturer | elago |
| Part Number | EAP-GUARD-MGD |
| Model | EAP-GUARD-MGD |
8. elago
1 Set, elago Dust Guard Compatible with Apple AirPods Pro, Upgraded Dustproof Film, Luxurious Looking, Protect from Iron/Metal Shavings US Patent Registered Dark Grey
Luxurious-looking keep your airpods pro tidy and looking beautiful all the time! elago Dust guard has various colors and a luxurious plating. 2 hold the guide sticker and attach the dust guard while lining it up with the holes. Perfect dust-proof film magnets in airpods pro case gather a lot of iron & metal dust over time causing permanent black marks inside the case. Installation 1 attach the guide sticker to the dust guard as shown.
Experience flawless use of the case with the Dust Guard installed. Important note it may take you some time and effort to align the dust guard stickers on AirPods Pro, but if you want to keep your airpods Pro clean and beautiful, it will be well worth it. Upgraded thin slim design the thickness of the plate is 004mm. 4 check that it was aligned properly.
| Brand | elago |
| Manufacturer | elago |
| Weight | 0.01 kg (0.03 Pounds) |
| Part Number | EAPP-GUARD-DG-1EA |
| Model | EAPP-GUARD-DG-1EA |
9. elago
Elago Dust Guard Compatible with Apple AirPods, Chromium Plating Protection from Iron/Metal Shavings Easy installation 2 Set, Matte Space Grey
If it is not attached properly, it can scratch the AirPods. The thickness of the plate is 004mm. Experience flawless use of the case with the Dust Guard installed. 4 place your fingers in the AirPods inserts to check if the dust guard is applied properly. The guard can easily be exchanged out if needed. The guard acts as a buffer between your case and the metallic dust that accumulates over time. But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market.
Installation 1 attach the bottom sticker on the body portion by aligning it with the led indicator light. It might be hard and take time to align the stickers on AirPods. 2 place the top sticker upside down on the bottom portion so that the adhesive side faces upwards on the body portion.
| Brand | elago |
| Manufacturer | elago |
| Height | 1.02 cm (0.4 Inches) |
| Length | 9.91 cm (3.9 Inches) |
| Weight | 0 kg (0 Pounds) |
| Width | 6.6 cm (2.6 Inches) |
| Part Number | 8809461761282 |
| Model | 8809461761282 |
10. elago
Rose Gold, 18K Gold plating Protection from Iron/Metal Shavings Easy installation 1 Set, elago Dust Guard for AirPods
2 place the top sticker upside down on the bottom sticker so that the adhesive side faces upwards on the body portion. 3 close lid over the upward facing dust guard so that it sticks perfectly to cap once shut. Experience flawless use of the case with the Dust Guard installed. But the elago airpods dust guard is made of metal which can be installed easier and cleaner, unlike any other products on the market. The guard can easily be exchanged out if needed. It might be hard and take time to align the stickers on AirPods. The thickness of the plate is 004mm. The guard acts as a buffer between your case and the metallic dust that accumulates over time.
| Brand | elago |
| Manufacturer | elago |
| Height | 6.5 cm (2.56 Inches) |
| Length | 1.09 cm (0.43 Inches) |
| Weight | 0.03 |
| Width | 9.8 cm (3.86 Inches) |
| Part Number | EAP-GUARD-RGD-1S |
| Model | EAP-GUARD-RGD-1S |